| 2 | Heat Loss Calculation of Compound Honeycomb Solar Collector显示文摘A simplified technique is described for calculating the heat loss coefficient from the absorber of the solar flat-plate collector with a combined honeycomb.The problem is treated in two ways:the coupled mode and the decoupled mode.In the analysis,the cell wall and glass cover are assumed to be specularly reflecting and diffusely emitting surfaces,while the absorber is a diffusely reflecting and emitting surface.The influences of emissivities of the absorber and the cell wall as wall as well as the aspect ratio on the heat loss coefficient are predicted.The theoretical results are compared with experimental data reported in the literature,and the agreement is good. | X.S.Ge Y.Z.Zhang H.L.Huang J.W.Gao | 1993 | Journal of Thermal Science1993，2，4： | 0 |
| 4 | Microstructural stability and aging behavior of refractory high entropy alloys at intermediate temperatures显示文摘Several body-centered-cubic(BCC)refractory high entropy alloys(HEAs),i.e.,Hf Nb Ta Ti Zr,Nb Ta Ti Zr,Hf Nb Ti Zr and Nb Ti Zr,were annealed at intermediate temperatures for 100 h,and their microstructures and aging behaviors were studied in detail.All these HEAs start to decompose into multiple phases at around 500°C,but reenter the single-phase region at significantly different temperatures which were determined to be 900,1000,1100 and above 1300°C for Hf Nb Ti Zr,Nb Ti Zr,Hf Nb Ta Ti Zr and Nb Ta Ti Zr,respectively.Our analysis indicates that the onset decomposition temperature in these four HEAs is closely related to the elemental diffusion rates while the ending decomposition temperature is strongly dependent on the elemental melting points.Our findings are important not only for understanding phase stability of HEAs in general,but also for adjusting processing parameters to optimize mechanical properties of these HEAs. | P.P.Cao H.L.Huang S.H.Jiang X.J.Liu H.Wang Y.Wu Z.P.Lu | 2022 | Journal of Materials Science & Technology2022，，27： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员