| 1 | Fabrication and characterization of affordable hydrophobic ceramic hollow fibre membrane for contacting processes显示文摘Affordable hydrophobic hollow fibre membranes were prepared using kaolin and alumina based ceramic powders via a combined phase inversion and sintering technique,followed by a grafting with fluoroalkylsilane(FAS).The crux of the matter in this paper is to study the changes in the properties of the hollow fibre membranes(gas permeation,mechanical strength,pore size,porosity,tortuosity,morphology,and contact angle)by the addition of alumina(Al2O3)to the pure kaolin with mono or multiparticle sizes.By varying the overall loading and particle size of alumina addition,different morphologies of the membranes were obtained due to the differences in the path lengths during phase inversion process for each solvent and nonsolvent exchange.The successful grafting with FAS was evidenced by the increase in contact angle from nearly equal to zero degree before grafting to 140°after grafting.Kaolin-alumina-4,one of the hollow fibres fabricated in this work,achieved a mean pore size of 0.25μm with the bending strength of 96.4 MPa and high nitrogen permeance of 2.3×10^(-5) mol·m^(-2)·Pa^(-1)·s^(-1),which makes the hollow fibre most suitable for the membrane contactor application. | Mohammed Abdulmunem ABDULHAMEED Mohd Hafiz Dzarfan OTHMAN Haider Nadhom Azziz Al JODA Ahmad Fauzi ISMAIL Takeshi MATSUURA Zawati HARUN Mukhlis A.RAHMAN Mohd Hafiz PUTEH Juhana JAAFAR | 2017 | Journal of Advanced Ceramics2017，6，4： | 3 |
您所在的机构暂未开通此部分的功能，请联系管理员