|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Controllable synthesis of mesoporous carbon hollow microsphere twined by CNT for enhanced microwave absorption performance显示文摘The low dielectric loss of mesoporous carbon hollow microsphere(PCHM)requires high filler loading(higher than 20 wt%)when it is used as microwave absorbers.In order to decrease the filler loading of PCHM,a new strategy for synergistic increase of polarization and conductive loss was developed by twining PCHM with carbon nanotube(CNT)according to theoretic calculation.By the optimization of CNT content,the minimum reflection coefficient was -34.6 dB with a filler loading of only 10 wt%,which was much lower than -2.1 dB of PCHM.In addition,the effective absorption bandwidth was 3.6 GHz at X band with a thickness of 2.8 mm.The enhanced microwave absorption performance can be ascribed to the unique combination of hollow PCHM and one-dimensional CNT with higher graphitization degree,leading to increase of conductivity and heterogeneous interfaces.As a result,the conductive loss increased from 0.12 to 2.27 and polarization loss increased from 0.15 to 0.67,achieving the balance between attenuation ability and impedance match. | Minghang Li Xiaomeng Fan Hailong Xu Fang Ye Jimei Xue Xiaoqiang Li Laifei Cheng | 2020 | Journal of Materials Science & Technology2020，59，24： | 4 |
| 2 | Electromagnetic interference shielding Ti3C2Tx-bonded carbon black films with enhanced absorption performance显示文摘The demand for flexible and freestanding electromagnetic interference(EMI)shielding materials are more and more urgent to combat with serious electromagnetic(EM)radiation pollution.Twodimensional Ti3C2Tx is considered as promising EMI shielding material to graphenes because of the low cost and high electrical conductivity.However,the shielding performance still needs to be optimized to decrease the reflection effectiveness(SER)and increase absorption effectiveness(SEA).Herein,we prepared Ti3C2Tx-bonded carbon black films with a porous structure.The SER decreased from 20 dB to12 dB and the SEA increased from 31 dB to 47 dB.The best EMI shielding effectiveness can be as high as60 dB with SEA of 15 dB and SER of45 dB.Their calculated specific shielding effectiveness can be as high as8718 dB cm^2/g.These results indicate that the porous structure can enhance the absorption of the EMI shielding films,resulting from the enhanced scattering and reflectio n.Conseque ntly,this work provides a promising MXene-based EMI shielding film with lightweight and flexibility. | Xiaomeng Fan Minghang Li Xin Li Fang Ye Jimei Xue Litong Zhang Laifei Cheng | 2020 | Chinese Chemical Letters2020，31，4： | 1 |
| 3 | Failure behavior of interfacial domain in SiC-matrix based composites显示文摘In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences in the mechanical response of the interfacial domain were observed.During the fiber push-in test for SiCf/BN/SiC,the interface debonding accompanied with interphase fracture occurred,resulting in an obvious sign of the onset of debonding on loading-displacement(P-u)curves.While the good continuity of P-u curves can be observed for Cf/PyC/SiC,which is due to that the failure is in the form of interface debonding along with interphase lateral slipping caused by the extension of buckled carbon fiber,without any interphase fracture.The interfacial properties calculated from the fiber push-in test show that Cf/PyC/SiC possesses a weaker interfacial domain compared with SiC_(f)/BN/SiC.The interfacial shear stress of SiCf/BN/SiC and C_(f)/PyC/SiC composites amounts 94.2 and 48.1 MPa,respectively. | Jinxue Ding Xiaokang Ma Xiaomeng Fan Jimei Xue Fang Ye Laifei Cheng | 2021 | Journal of Materials Science & Technology2021，，29： | 1 |
| 4 | Oxidation behaviors of carbon fiber reinforced multilayer SiC–Si_(3)N_(4) matrix composites显示文摘Oxidation behaviors of carbon fiber reinforced SiC matrix composites(C/SiC)are one of the most noteworthy properties.For C/SiC,the oxidation behavior was controlled by matrix microcracks caused by the mismatch of coefficients of thermal expansion(CTEs)and elastic modulus between carbon fiber and SiC matrix.In order to improve the oxidation resistance,multilayer SiC–Si_(3)N_(4) matrices were fabricated by chemical vapor infiltration(CVI)to alleviate the above two kinds of mismatch and change the local stress distribution.For the oxidation of C/SiC with multilayer matrices,matrix microcracks would be deflected at the transition layer between different layers of multilayer SiC–Si_(3)N_(4) matrix to lengthen the oxygen diffusion channels,thereby improving the oxidation resistance of C/SiC,especially at 800 and 1000℃.The strength retention ratio was increased from 61.9%(C/SiC–SiC/SiC)to 75.7%(C/SiC–Si_(3)N_(4)/SiC/SiC)and 67.8%(C/SiC–SiC/Si_(3)N_(4)/SiC)after oxidation at 800℃for 10 h. | Xiaolin DANG Donglin ZHAO Tong GUO Xiaomeng FAN Jimei XUE Fang YE Yongsheng LIU Laifei CHENG | 2022 | Journal of Advanced Ceramics2022，11，2： | 1 |
| 5 | Antithrombin gene Arg197Stop mutation-associated venous sinus thrombosis in a Chinese family显示文摘This study sought to elucidate the genetic correlation of cerebral venous sinus thrombosis caused by a hereditary antithrombin deficiency in a Chinese family,at the genetic and protein levels.A nonsense mutation from C to T on locus 6431 in exon 3B of the antithrombin gene was observed,leading to an arginine (CGA) to stop codon (TGA) change in the protein.This is the first report of this mutation in China.Ineffective heparin therapy in the propositus patient is associated with a lack of heparin binding sites after antithrombin gene mutation.Characteristic low intracranial pressure in the acute phase might be specific to this patient with cerebral venous sinus thrombosis. | Ang Li Tianhui Liu Zhandong Liu Jimei Li Chunling Zhang Jun Chen Jinmei Sun Yanfei Han Lili Wang Dexin Wang Qiming Xue Baoen Wang | 2011 | Neural Regeneration Research2011，6，20： | 1 |
| 6 | Evolution of microstructure and electromagnetic interference shielding performance during the ZrC precursor thermal decomposition process显示文摘A polymer-derived ZrC ceramic with excellent electromagnetic interference(EMI)shielding performance was developed to meet ultra-high temperature requirements.The thermal decomposition process of ZrC organic precursor was studied to reveal the evolution of phase composition,microstructure,and EMI shielding performance.Furthermore,the carbothermal reduction reaction occurred at 1300℃,and the transition from ZrO_(2) to ZrC was completed at 1700℃.With the increase in the annealing temperature,the tetragonal zirconia gradually transformed into monoclinic zirconia,and the transition was completed at the annealing temperature of 1500℃ due to the consumption of a large amount of the carbon phase.The average total shielding effectiveness values were 11.63,22.67,22.91,22.81,and 34.73 dB when the polymerderived ZrC was annealed at 900,1100,1300,1500,and 1700℃,respectively.During the thermal decomposition process,the graphitization degree and phase distribution of free carbon played a dominant role in the shielding performance.The typical core–shell structure composed of carbon and ZrC can be formed at the annealing temperature of 1700℃,which results in excellent shielding performance. | Zeli Jia Xiaomeng Fan Jiangyi He Jimei Xue Fang Ye Laifei Cheng | 2023 | International Journal of Minerals,Metallurgy and Materials2023，30，7： | 0 |
| 7 | A SiC nanowires/Ba_(0.75)Sr_(0.25)Al_(2)Si_(2)O_(8) ceramic heterojunction for stable electromagnetic absorption under variable-temperature显示文摘The application of semiconductor materials was limited as electromagnetic absorption materials,due to the unstable absorption performance caused by the temperature sensitivity.In this work,a structurally controllable ceramic heterojunction was developed by assembling structural units of SiC nanowires(SiCnws)and Ba_(0.75)Sr_(0.25)Al_(2)Si_(2)O_(8)(BSAS).Benefiting from the optimization of the energy gap and the construction of heterogeneous interfaces,the ceramic heterojunction can achieve stable electromagnetic absorption from room temperature to 600℃,the effective absorption bandwidth is almost unchanged.And the minimum reflection loss value reached-63.6 dB at 600℃.Meanwhile,the SiCnws/BSAS ceramic heterojunction shows stable electromagnetic absorption performance in various simulated outdoor environments,including acid rain,seawater,high temperature and water vapor corrosion.This result provides a fire-new idea to realize the environmental adaptability of electromagnetic absorption materials and largely broadens its application prospect. | Xin Li Xiaoke Lu Minghang Li Jimei Xue Fang Ye Xiaomeng Fan Yongsheng Liu Laifei Cheng Litong Zhang | 2022 | Journal of Materials Science & Technology2022，，30： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员