|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Preparation of hexagonal ultrathin WO3 nano-ribbons and their electrochemical performance as an anode material in lithium ion batteries显示文摘多达几测微计的 subnanometer 厚度, 25 nm 宽度,和长度的六角形的 ultrathin WO 3nano 带子(HUWNR ) 被一个 solvothermal 方法准备。同样准备的 HUWNR 成长[001 ] 方向,和主要暴露的方面是(120 ) 水晶飞机。因为他们的唯一的结构, HUWNR 在锂离子电池作为阳极材料展出好电气化学的性能。这些唯一的材料可以在许多地里被使用,这被相信。 | Chao Lian Xiaoling Xiao Zheng Chen Yuxi Liu Enyue Zhao Dingsheng Wang Chen Chen Yadong Li | 2016 | Nano Research2016，9，2： | 12 |
| 2 | The influence of Sc addition on microstructure and tensile mechanical properties of Mg-4.5Sn-5Zn alloys显示文摘The microstructure and tensile properties of the as-cast and as-rolled Mg-4.5Sn-5Zn alloys by adding various Sc content were investigated.Improvement of the tensile properties in as-cast Sc-containing alloys is attributed to the grain refinement and modification of secondary phase morphology.Three types of precipitates,namely spherical Mg2Sn,rod-like MgZn and Sc-rich phases were dispersed in the matrix of the Sc added M g-4.5Sn-5Zn alloys after hot rolling deformation.In addition,weakening and deflecting of the basal texture in as-rolled alloys were found and were attributed to Sc addition.Further increasing the Sc addition rate to 0.4 wt.%,however,resulted in the clustering of the Sc-rich phases and was found to reduce the tensile properties of the alloy,especially the elongation.The as-rolled Mg-4.5Sn-5Zn-0.3Sc alloy exhibits an optimum combination of tensile properties.The ultimate tensile strength,yield strength and elongation are 293.0MPa,164.2Mpa and 21.5%,respectively,and the elongation is about 68%higher than that of Sc-free alloy. | Pengqi Wang Enyu Guo Xuejian Wang Huijun Kang Zongning Chen Zhiqiang Cao Tongmin Wang | 2019 | Journal of Magnesium and Alloys2019，7，3： | 6 |
| 3 | IL-17 sustains the plasma cell response via p38-mediated Bcl-xL RNA stability in lupus pathogenesis显示文摘Recent studies have demonstrated a central role for plasma cells in the development of autoimmune diseases,such as systemic lupus erythematosus(SLE).Currently,both the phenotypic features and functional regulation of autoreactive plasma cells during SLE pathogenesis remain largely unclear.In this study,we first found that a major subset of IL-17 receptor-expressing plasma cells potently produced anti-dsDNA IgG upon IL-17A(IL-17)stimulation in SLE patients and lupus mice.Using a humanized lupus mouse model,we showed that the transfer of Th17 cell-depleted PBMCs from lupus patients resulted in a significantly reduced plasma cell response and attenuated renal damage in recipient mice compared to the transfer of total SLE PBMCs.Moreover,long-term BrdU incorporation in lupus mice detected highly enriched long-lived BrdU+subsets among IL-17 receptor-expressing plasma cells.Lupus mice deficient in IL-17 or IL-17 receptor C(IL-17RC)exhibited a diminished plasma cell response and reduced autoantibody production with attenuated renal damage,while the adoptive transfer of Th17 cells triggered the plasma cell response and renal damage in IL-17-deficient lupus mice.In reconstituted chimeric mice,IL-17RC deficiency resulted in severely impaired plasma cell generation but showed no obvious effect on germinal center B cells.Further mechanistic studies revealed that IL-17 significantly promoted plasma cell survival via p38-mediated Bcl-xL transcript stabilization.Together,our findings identified a novel function of IL-17 in enhancing plasma cell survival for autoantibody production in lupus pathogenesis,which may provide new therapeutic strategies for the treatment of SLE. | Kongyang Ma Wenhan Du Fan Xiao Man Han Enyu Huang Na Peng Yuan Tang Chong Deng Lixiong Liu Yulan Chen Jingjing Li Shiwen Yuan Qin Huang Xiaoping Hong Dajun Hu Xiaoyan Cai Quan Jiang Dongzhou Liu Liwei Lu | 2021 | Cellular & Molecular Immunology2021，18，7： | 6 |
| 4 | Advances in COVID-19 mRNA vaccine development显示文摘To date,the coronavirus disease 2019(COVID-19)caused by severe acute respiratory syndrome coronavirus 2(SARS-CoV-2)has determined 399,600,607 cases and 5,757,562 deaths worldwide.COVID-19 is a serious threat to human health globally.The World Health Organization(WHO)has declared COVID-19 pandemic a major public health emergency.Vaccination is the most effective and economical intervention for controlling the spread of epidemics,and consequently saving lives and protecting the health of the population.Various techniques have been employed in the development of COVID-19 vaccines.Among these,the COVID-19 messenger RNA(mRNA)vaccine has been drawing increasing attention owing to its great application prospects and advantages,which include short development cycle,easy industrialization,simple production process,flexibility to respond to new variants,and the capacity to induce better immune response.This review summarizes current knowledge on the structural characteristics,antigen design strategies,delivery systems,industrialization potential,quality control,latest clinical trials and real-world data of COVID-19 mRNA vaccines as well as mRNA technology.Current challenges and future directions in the development of preventive mRNA vaccines for major infectious diseases are also discussed. | Enyue Fang Xiaohui Liu Miao Li Zelun Zhang Lifang Song Baiyu Zhu Xiaohong Wu Jingjing Liu Danhua Zhao Yuhua Li | 2022 | Signal Transduction and Targeted Therapy2022，7，4： | 5 |
| 5 | Annealed microstructure dependent corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy显示文摘Corrosion resistance of titanium(Ti)alloys is closely connected with their microstructure which can be adjusted and controlled via different annealing schemes.Herein,we systematically investigate the specific effects of annealing on the corrosion performance of Ti-6 Al-3 Nb-2 Zr-1 Mo(Ti80)alloy in 3.5 wt.%NaCl and 5 M HCl solutions,respectively,based on open circuit potential(OCP),potentiodynamic polarization,electrochemical impedance spectroscopy(EIS),static immersion tests and surface analysis.Results indicate that increasing annealing tempe rature endows Ti80 alloy with a higher volume fraction ofβphase and finerαphase,which in turn improves its corrosion resistance.Surface characterization demonstrates thatβphase is more resistant to corrosion thanαphase owing to a higher content of Nb,Mo,and Zr in the former;additionally,the decreased thickness of a phase alleviates segregation of elements to further restrain the micro-galvanic couple effects betweenαandβphases.Meanwhile,the influential mechanisms of environmental conditions on corrosion of Ti80 alloy are discussed in detail.As the formation of a highly compact and stable oxide film on surface,annealed Ti80 alloys exhibit a low corrosion current density(10^(-6)A/cm^(2))and high polarization impedance(10^(6)Ω·cm^(2))in 3.5 wt.%NaCl solution.However,they suffer severe corrosion in 5 M HCl solution,resulting from the breakdown of native oxide films(the conversion of TiO_(2)to aqueous Ti^(3+)),active dissolution of substrate Ti to aqueous Ti^(3+)and existence of micro-galvanic couple effects.Those findings could provide new insights to designing Ti alloys with high-corrosion resistance through microstructural optimization. | Baoxian Su Liangshun Luo Binbin Wang Yanqing Su Liang Wang Robert O.Ritchie Enyu Guo Ting Li Huimin Yang Haiguang Huang Jingjie Guo Hengzhi Fu | 2021 | Journal of Materials Science & Technology2021，，3： | 5 |
| 6 | Microstructural characteristics and mechanical behavior of B4Cp/6061Al composites synthesized at different hot-pressing temperatures显示文摘B4Cp/6061Al composites have become important structural and functional materials and can be fabricated by powder metallurgy and subsequent hot rolling. In this work, the effects of the hot-pressing temperature on microstructures and mechanical behaviors of the B4Cp/6061Al composites were investigated. The results showed that compared with the T4 heat treated B4Cp/6061Al composite hot pressed at 560℃, the yield strength and failure strain of the composites hot pressed at 580℃ were increased to 235 MPa and 18.4%, respectively. This was associated with the interface bonding strength between the B4C particles and the matrix. However, the reaction products, identified to be MgAl2O4 phases, were detected in the composites hot pressed at 600℃. The formation of the MgAl2O4 phases resulted in the Mg depletion, thus reducing the yield strength to 203.5 MPa after the T4 heat treatment due to the effect of the solid solution strengthening being weakened. In addition, the variation of hardness and electrical conductivity was mainly related to the Mg content in the matrix. Based on the as-rolled microstructures observed by SEM, SR-μCT and fracture surfaces, the deformation schematic diagram was depicted to reflect the tensile deformation process of the composites. | Minqiang Gao Zongning Chen Huijun Kang Enyu Guo Rengeng Li Ying Fu Honglan Xie Tongmin Wang | 2019 | Journal of Materials Science & Technology2019，35，8： | 4 |
| 7 | Tailoring interphase structure to enable high-rate, durable sodium-ion battery cathode显示文摘Na-based layered transition metal oxides with O_(3)-type structure have been considered to be promising cathodes for Na-ion batteries. However, the intrinsically limited Na-ion conductivity induced by the Otype Na-coordinate environment compromises their rate and cycle capability, hindering their practical application. Here, we report an interphase-structure tailoring strategy that improves the electrochemical properties of O_(3)-type layered cathodes achieved through surface coating and doping processes.Specifically, a Zr-doped interphase structure is designed in the model compound NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2) using the ionic conductor Na_(3)Zr_(2)Si_(2)PO_(12) as the surface coating material and Zr-dopant provider. We discover that the modified NaNi_(1/3)Mn_(1/3)Fe_(1/3)O_(2)cathode shows a stable Na-storage structure as well as an enhanced rate/cycle capability. Combined with theoretical calculations, it is suggested that the superior electrochemical performances originate from the Zr-doped interphase structure, which has an enlarged Na layer spacing that forms favorable Na-ion diffusion channels. This work highlights a general material interface optimization method which opens a new perspective for fabricating high-performance electrodes for Na-ion batteries and beyond. | Na Li Shaofei Wang Enyue Zhao Wen Yin Zhigang Zhang Kang Wu Juping Xu Yoshihiro Kuroiwa Zhongbo Hu Fangwei Wang Jinkui Zhao Xiaoling Xiao | 2022 | Journal of Energy Chemistry2022，31，5： | 4 |
| 8 | Influence of deformation on the corrosion behavior of LZ91 Mg-Li alloy显示文摘The effect of rolling and forging on the microstructure and corrosion behavior of LZ91 alloy was investigated using an electron probe micro-analyzer,immersion and electrochemical tests.Results showed that the area fraction of theβ-Li phase remained unchanged,and the grain size of theβ-Li phase decreased after forging.The as-rolled forged alloy(FR-LZ91)exhibited the highest area fraction of theβ-Li phase and the longest grains.The corrosion resistance of the forged LZ91 alloy increased due to grain refinement that prevented further corrosion during the immersion test.Among the experimental alloys,FR-LZ91 showed the highest resistance of corrosion film and charge transfer resistance values due to its protective film caused by the high area fraction of theβ-Li phase. | Xueqin Liu Xuejian Wang Enyu Guo Zongning Chen Huijun Kang Tongmin Wang | 2023 | International Journal of Minerals,Metallurgy and Materials2023，30，1： | 3 |
| 9 | Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process显示文摘The mechanical properties and corrosion behavior of as-cast, as-annealed and hot-rolled nickelaluminum bronze(NAB) alloy(Cu-9 Al-10 Ni-4 Fe-1.2 Mn, all in wt.%) in 3.5 wt.% Na Cl solution were investigated. The results show that annealing introduces a large number of k phases to precipitate in the k phase. However, after further hot rolling, the original continuous k phases are spheroidized and dispersed, increasing the strength, hardness, and elongation of the alloy. In addition to the enhanced mechanical properties, the corrosion resistance of the NAB samples is also improved significantly by hot rolling, as revealed by the mass loss measurements, electrochemical impedance spectroscopy(EIS), and cross-sectional corrosion morphology. Selective phase corrosion occurs by the preferential corrosion of the k phase, which acts as an anode to the k phases, and the uncorroded k phases are retained in the corrosion product film. The interfaces between the k phases and the surrounding corrosion products become discontinuous caused by the spheroidization of k phases, reducing the corrosion of the substrate by the corrosive medium via the channels. As a result, the corrosion rate and the maximum local corrosion depth of the hot-rolled NAB sample are greatly reduced. | Yanhua Zeng Fenfen Yang Zongning Chen Enyu Guo Minqiang Gao Xuejian Wang Huijun Kang Tongmin Wang | 2021 | Journal of Materials Science & Technology2021，，2： | 3 |
| 10 | High-capacity lithium-rich cathode oxides with multivalent cationic and anionic redox reactions for lithium ion batteries显示文摘Lithium-rich cathode oxides with capability to realize multivalent cationic and anionic redox reactions have attracted much attention as promising candidate electrode materials for high energy density lithium ion batteries because of their ultrahigh specific capacity. However, redox reaction mechanisms, especially for the anionic redox reaction of these materials, are still not very clear. Meanwhile, several pivotal challenges associated with the redox reactions mechanisms, such as structural instability and limited cycle life, hinder the practical applications of these high-capacity lithium-rich cathode oxides. Herein, we review the lithium-rich oxides with various crystal structures. The multivalent cationic/anionic redox reaction mechanisms of several representative high capacity lithium-rich cathode oxides are discussed, attempting to understand the origins of the high lithium storage capacities of these materials. In addition, we provide perspectives for the further development of these lithium-rich cathode oxides based on multivalent cationic and anionic redox reactions, focusing on addressing the fundamental problems and promoting their practical applications. | Enyue Zhao Xiqian Yu Fangwei Wang Hong Li | 2017 | Science China Chemistry2017，60，12： | 3 |
| 11 | Combustion Wave Propagation of a Modular Porous Burner with Annular Heat Recirculation显示文摘A numerical investigation of the different arrangements of porous media in a combustor with annular heat recirculation is conducted.The effect of annular heat recirculation and porous block arrangement on the characteristics of combustion wave propagation is numerically studied.Results show that power input,heat capacity of porous matrix,arrangement of porous blocks,and annular heat recirculation are major factors that influence the propagation of combustion wave.The overall temperature of ceramic porous burner is higher than that of ceramic-metal type burner due to the lower heat storage capacity of the former,especially for the temperature downstream.The flame temperature is higher upstream and lower downstream with metal foams in the annulus than that without metal foams.The flame temperature of uniformity type burner is more uniform than that of gradually-varied and modular type burners.The flame front moves more slowly with metal foams in the annulus than that without metal foams due to the better preheating effect of metal foams.The flame position moves downstream,and the flame temperature gradually decreases and is eventually extinguished due to the low preheating temperature. | SONG Fuqiang WEN Zhi FANG Yuan WANG Enyu LIU Xunliang | 2020 | Journal of Thermal Science2020，29，1： | 2 |
| 12 | A network model of knowledge accumulation through diffusion and upgrade显示文摘 | Enyu Zhuang Guanrong Chen Gang Feng | 2011 | Physica A: Statistical Mechanics and its Applications2011，390，13： | 1 |
| 13 | Weighted inverse minimum spanning tree problems under Hamming distance 显示文摘 | He Yong Zhang Binwu Yao Enyu | 2005 | Journal of Combinatorial Optimization2005，9，1： | 1 |
| 14 | Nilvadipine attenuates mesangial expansion and glomerular hypertrophy in diabetic db/db mice, a model for type 2 diabetes显示文摘 | Toshiki Moriyama Kazumasa Oka Hirotsugu Ueda Enyu Imai | 2004 | Journal of Clinical and Experimental Nephrology2004，，3： | 1 |
| 15 | Performance prediction of a hybrid solar ground-source heat pump system 显示文摘 | Wanga Enyu Fung Alan S Qi Chengying | 2012 | Energy and Buildings2012，47，： | 1 |
| 16 | Wire Oscillating Laser Additive Manufacturing of 2319 Aluminum Alloy: Optimization of Process Parameters, Microstructure, and Mechanical Properties显示文摘In this study,a wire oscillating laser additive manufacturing(O-WLAM)process was used to deposit 2319 aluminum alloy samples.The optimization of the deposition process parameters made it possible to obtain samples with smooth surfaces and extremely low porosities.The effects of the deposition parameters on the formability and evolution of the microstructure and mechanical properties before and after heat treatment were studied.The oscillating laser deposition of 2319 aluminum alloy,especially the circular oscillation mode,significantly reduced the porosity and improved the process stability and formability compared with non-oscillating laser deposition.There were clear boundaries between the deposition units in the deposition state,the interior of which was dominated by columnar crystals with many rod-and point-shaped precipitates.After the heat treatment,theθphase was significantly dissolved.The residual dot-and rod-shapedθ'phases were dispersedly distributed,exhibiting an obvious precipitation-hardening effect.The samples in the as-deposited state had a tensile strength of 245–265 MPa,an elongation of approximately 12.6%,and an 87 HV microhardness.After heat treatment at 530°C for 20 h and aging at 175°C for 18 h,the tensile strength,elongation,and microhardness reached 425–440 MPa,approximately 10%,and 153 HV,respectively.The performance improved significantly without significant anisotropy.Compared with the samples produced by wire arc additive manufacturing(WAAM),the tensile strength increased by approximately 10%,and the strength and microhardness were significantly improved. | Xujian Cui Enyu Qi Zhonggang Sun Chuanbao Jia Yong Zeng Shikai Wu | 2022 | Chinese Journal of Mechanical Engineering(Additive Manufacturing Frontiers)2022，1，3： | 1 |
| 17 | Current status of the development of premixed combustion in porous media显示文摘 | Cheng Leming Wang Enyu Luo Zhongyang | 2003 | Power System Engineering2003，19，1： | 1 |
| 18 | Simple relay selection criterionfor general two-way opportunistic relaying networks显示文摘 | Li Enyu Yang Shizhong | 2012 | IET Electron Lett2012，48，14： | 1 |
| 19 | Kidney repair using stem cells: myth or reality as a therapeutic option显示文摘 | Hirotsugu I Enyu I | 2010 | J Nephrol2010，23，2： | 1 |
| 20 | Negative effects of anemia on quality of life and its improvement by complete correction of anemia by administration of recombinant human erythropoietin in posttransplant patients显示文摘 | Noritaka Kawada Toshiki Moriyama Naotsugu Ichimaru Ryoichi Imamura Isao Matsui Yoshitsugu Takabatake Yasuyuki Nagasawa Yoshitaka Isaka Yasuyuki Kojima Yukito Kokado Hiromi Rakugi Enyu Imai Shiro Takahara | 2009 | Clinical and Experimental Nephrology2009，，4： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员